Surface mounted door operators offer intelligent. ASSA ABLOY SW200i surface mounted automatic swing door operator ASSA ABLOY SW200i surface mounted automatic swing door operator ASSA ABLOY SW200i surface mounted automatic swing door operator ASSA ABLOY SW200i surface mounted automatic swing. Low energy manual push force for smooth. • Besam Revolving Door RD3/RD4 User Manual 1003090-EI-2.0 – Issue 2006-12-21 An ASSA ABLOY Group company. • © All rights in and to this material are the sole property of ASSA ABLOY Entrance Systems AB. Copying, scanning, alterations or modifications are expressly forbidden without the prior written consent of applicable company within ASSA ABLOY Entrance Systems AB. Rights reserved for changes without prior notice. Issue 2006-090-EI-2.0. • Table of content Important information. 5 Important safety instructions for use. 24 Compressible safety switches on the door leaves. • This manual contains necessary details and instructions for the daily use of the Besam revolving door RD3/RD4. Besam RD3/RD4 is designed to offer continuous use, a high degree of safety and maximum lifetime. The system is self-adjusting to the effects caused by normal variations in the weather conditions and to minor friction changes caused by e.g. • Service Service When your door needs to be serviced, contact the nearest authorized Besam service centre. Place for telephone number, stamp, sticker or the like. We recommend inspection of doors at least once a year (see page 23). According to regulations inspection of emergency escape doors is required at least twice a year, carried out by an authorized service centre. • Main parts Main parts Description Programme selector and reset push-button Emergency stop push-button Activation unit 1003090-EI-2.0 Issued 2006-12-21. • Operation Operation Programme selector The programme selector is equipped with a three position key switch and a reset push-button. Controladora de video compatible vga drivers. If the door is equipped with a PCD programme selector, (see page 13). Start up • Open the night security doors, if fitted •. • Operation Switch off • Check there is no traffic • Turn the programme selector to off position The door rotates to its home position The electro-mechanical lock, if fitted, is locked • Lock the mechanical lock, if fitted • Close and lock the night security doors, if fitted Reset •. ![]() • Safety equipment Safety equipment ILL-00043 Standard Description Compressible safety switches placed on the drum edges (see page 11) Force sensitive door leaves (see page 11) Emergency stop push-button (see page 12) Options Description Compressible safety switches placed on the door leaves (see page 24) Infrared presence sensing system (see page 24) Vertical presence photocell sensor PDR (see page 25) Break-out kit (see page 25) • Safety equipment Standard 6.1.1 Compressible safety switches Compressible safety switches on the drum edges. These stop the rotation if com- pressed. When the obstacle is removed, the rotation continues. 6.1.2 Force sensitive door leaves • If the system detects an obstacle blocking the door, the power to the motor is shut-off •. • Safety equipment 6.1.3 Emergency stop push-button • The door rotation can be stopped by pressing the emergency stop push-button • To reset the door to normal operation - release the emergency stop push-button by rotating it in any direction and press the reset push-button or the C push- button on the PCD (if installed) ILL-00044 ILL-00049. • Programme selector PCD Programme selector PCD As option the RD3/RD4 can be equipped with programme selector PCD (pro- gramme control device) with access codes to operate the door. General information Function Numeric inputs Confirm access code input Setpoint selection upwards.
0 Comments
Leave a Reply. |